Available Beginning March 2024

Be sure to fill out the inquiry form below so that you’ll be first in line…

Pre Assembled PCBs

Available from LT McComb

Save time, effort and probably a few tears. Now you can purchase your FlightSimDIY PCBs fully assembled from a pro with over 30 years of electronics experience. That means no more waiting for parts to come from half way around the world. Best of all, no more soldering. You’ll be able to finish your build faster and get flying sooner.

With almost 1200 solder connections and 250+ components there are so many advantages to ordering preassembled PCB’s for your FSD G1000/GMA1347 suite

  • Single source vendor means no more searching for parts

  • Fully tested and programmed for Mobiflight

  • Save time to use for other projects and get flying sooner

  • No need for expensive soldering equipment and supplies

  • Guaranteed to work out of the box

  • G1000 no Autopilot

    Includes the Rightside, Leftside (no AP buttons), Bottom and the Mobiflight Control board PCBs. All components soldered onto the boards and tested. As well as the Arduino card installed and preprogrammed with the Mobiflight configuration.

    $170

  • G1000 with Autopilot

    Includes the Rightside, Leftside, Bottom and the Mobiflight Control board PCBs. All components soldered onto the boards and tested. As well as the Arduino card installed and preprogrammed with the Mobiflight configuration.

    $175

  • GMA 1347

    Includes the Faceplate and Control board PCBs. All components soldered onto the boards and tested. As well as the Arduino card installed and preprogrammed with the Mobiflight configuration.

    $90

  • Dual G1000 with GMA1347

    Includes Two G1000 sets and the GMA1347 set. All components soldered onto the boards and tested. As well as 3 Arduino cards installed and preprogrammed with the Mobiflight configurations. (Please specify if you want both with AP buttons or just one unit.

    $430

  • PCBs and Parts only

    Still want to do your own soldering and assembly but don’t want to search the world for parts. I also offer the PCBs and all components shipped together as a kit. Save you the time and effort of tracking down all the parts.

    Please contact me via the form below for availability and pricing.

More Details:

All PCBs will come fully assembled, programmed, and tested with all components. It is up to the final user as to how the backlight and LCD dimmer feature is implemented. As well as the pan/range control.  Please refer to FlightSimDIY’s instruction for these options. I have made every effort to ensure a top-quality product for your sim, however due to manufacturing tolerances you may need to do some slight modification to the 3D print files.  Most notable are the single encoders depth (See DIY’s Discord for more information). All questions/concerns as to Mobiflight programing should be referred to the FlightSimDIY or Mobiflight Discord servers.

All PCBs can be ordered in kit form.  This will include all the PCBs and components but they will not be assembled.

All destination shipping charges are the responsibility of the purchaser and will be added to the final invoice.

For more information or if interested in ordering. Fill out the form and I will contact you with all the details.